Kuala Lumpur Certified Badminton Stringing Website
ERR Badminton Restring
BookBook
English

Page language

English阅读中文Melayu
ERR BADMINTON RESTRING · STRING GUIDE

Kizuna Z64: String Guide & Stringing in Setapak KL

Kizuna Z64 is a 0.64 mm nylon badminton string in a 10 m set. Check the original packet and compare clear length, touch and nearby Kizuna models before a Setapak restring.

Front of the Kizuna Z64 packet beside a badminton racket
1.1 Z64

Correct the model identity first

The yellow packet retained from ERR’s catalogue reads Z64, not Z64X. Kizuna’s archived 2015 manufacturer advertisement and the Japan Badminton Association’s 2019 list also identify Z64. This page therefore uses the verified packet name while preserving its existing URL.

The manufacturer advertisement specifies a 0.64 mm gauge and 10 m set, with a high-strength nylon multifilament core and braided nylon outer. The packet identifies Japan. These historical product details establish identity without proving present availability.

No separate official Z64X product was established in the checked material. The older ERR wording remains relevant when recognising a previous booking, but it should not be used to invent another version. Confirm the actual packet if returning to this string.

The yellow and white packet identifies the string as Z64, with 0.64 mm and 10 m on the front. The letter X appeared in an earlier ERR listing. Keep the packet’s shorter name in your records so the next restring is compared with the right product.

Overhead view of a Kizuna Z64 packet and string on a badminton court
1.2 Z64

Explore response without a coating assumption

The historical manufacturer positioning emphasises rebound. That describes the intended character, not a measured increase in shot speed. Gauge is one part of a string choice; the frame, installed setting and contact also influence the result.

The previous page linked a sticky surface with greater firmness and reduced string movement. That causal explanation was not verified and is not repeated as a technical fact. Visible movement alone cannot measure stiffness, coating composition or the quality of a restring.

Compare ordinary clears, compact drives and gentle returns if the exact Z64 is available. Notice effort and predictability across these shots. No controlled independent study establishing its response, sound or lifespan advantage over Ultimax was verified here.

Try a gentle return off a short feed and then a quicker cross-court push. Check which stroke gives you a more predictable contact sensation in your regular racket. Continue the comparison with the same type of shuttle when you return the next week, especially if the first session was unfamiliar.

Original retail packet for Kizuna Z64
1.3 Z64

Decide whether revisiting Z64 makes sense

Z64 may be relevant when you remember a previous 0.64 mm setup and want to understand what suited you. Bring the earlier frame and setting details where possible. A remembered product name alone cannot reproduce the complete experience.

If your main concern is rapid breakage, inspect the wear location, grommets and contact pattern before selecting a replacement. The old best-in-class durability wording does not establish a fixed number of sessions or a verified advantage over another model.

Someone seeking easier normal clear length should discuss the current setup and contact, rather than assuming any fine string will solve the problem. Consider alternatives with current documentation and availability if the original Z64 packet cannot be confirmed.

If you have played Z64 before, ask what made the earlier setup worth repeating. It might have been ordinary back-court length, predictable defence or easy adjustment between short and long returns. Note the previous racket and tension. See how consistently that stroke feels before you change anything else.

Three-quarter view of Kizuna Z64 on a stringing bench
1.4 Z64

Set a context-specific starting point

No current Z64-specific recommended range was verified in the checked primary material. Do not fill that gap with Z63X or Z65 guidance. Check instructions applicable to the actual string and the exact racket’s allowed limits and condition.

The old ERR entry recorded a 26 lbs installation. That number is a historical detail, not a universal recommendation or evidence that 24–26 lbs suits every player. Share your present string, pounds, frequency and preferred impact sensation.

Pre-stretch, main-and-cross differences, pattern and knots must follow an appropriate frame and equipment procedure. Agree one meaningful change and assess familiar shots afterwards. Avoid choosing from a maximum number or assuming a particular gauge dictates the correct pounds.

Bring the racket so the shop can check its model, condition and grommets before choosing your starting point. Share both the old setting and the way the bed felt during a slow exchange. Agree on one change at a time if you want the string trial to answer a particular question.

Detail of a Kizuna Z64 string coil beside its packaging
1.5 Z64

Preserve the old DT record honestly

Under the former Z64X page label, ERR recorded Day 1 at 53–57 DT, Day 2 at 51–53 and Day 3 at 49–52, with a stated 26 lbs installation. The chart retains these historical intervals rather than creating a new result.

The packet-name mismatch and incomplete exact-batch information are important limitations. Instrument, calibration, elapsed time, court exposure and environment are also missing. The record does not establish a controlled retention comparison or a universal replacement interval.

Keep DT distinct from requested machine pounds. For future tracking, record exact packet identity, racket, method, time, playing hours and wear alongside normal-shot feedback. Consistent observations are more useful than interpreting a lone reading as proof of quality.

For a new Z64 record, note how long the bed has been fitted and how much it was played between readings. An archive helps identify a previous setup. Use a fresh note about clear length and placement to compare what is happening to your current racket over time.

Low-angle view of a Kizuna Z64 packet under side lighting
1.6 Z64

Compare nearby gauges as separate products

Z63X Premium is a separately named 0.63 mm nylon model with a regional Medium label. It is not evidence of an X version of Z64. Its own product guidance and player-trial context should stay attached to Z63X.

Z65 Premium is a 0.65 mm nylon alternative positioned around all-round response. The slightly different diameter does not by itself establish a softer impact or longer life. Compare the actual response and maintenance needs at appropriate settings.

BG66 Ultimax is another 0.65 mm option with a high-intensity nylon core and braided outer. Z64’s 0.01 mm nominal difference is not a measured advantage in speed or durability. Evaluate familiar clears and gentle placement, not just the sound of a hard hit.

Z63X and Z65 sit close to Z64 in nominal diameter. Choose the one that matches the comparison you want to make, then use an ordinary clear and a soft return from familiar feeds. Compare both outcomes before deciding that a small gauge difference will suit every shot.

Z64 Knowledge Check

How well do you know this string?

0 / 8 answered
Question 1 / 8
Z64 at a glance
Nominal gauge0.64 mm
Product codeZ64
Retail set length10 m
ERR restringRM43.00, string and labour
Z64 performance explorer

Correct identity before performance assumptions

Archived manufacturer specifications

Packet model
Z64 · formerly labelled Z64X by ERR
Gauge and set
0.64 mm · 10 m
Construction
Nylon multifilament core and braided nylon outer
Packet origin marking
Japan

Keep claims within the evidence

No separate official Z64X identity or controlled lifespan advantage was established.

Visible movement and perceived surface tack do not measure stringbed stiffness.

Confirm the actual packet and assess ordinary shots at an appropriate setting.

Manufacturer performance profile

The numbers behind the feel

Z64 uses verified archived identity without an invented performance score.

Archived manufacturer specifications

Packet model
Z64 · formerly labelled Z64X by ERR
Gauge and set
0.64 mm · 10 m
Construction
Nylon multifilament core and braided nylon outer
Packet origin marking
Japan

Z64 DT over three days

3 recorded days 26 lb machine setting
  1. Day 153–57 DT
  2. Day 251–53 DT
  3. Day 349–52 DT

Recorded range Range midpoint

These readings describe an earlier installation. Use them to understand the recorded change across days.

Z64 and three alternatives

Compare construction and priorities rather than treating a model name as an upgrade ladder. These are different options, not a controlled ranking.

Gauge, construction and what to try on court
StringGaugeConstruction or feelWhat to check on court
Z640.64 mmNylon multifilament core and braided nylon outerFormer ERR label Z64X; confirm actual packet
Kizuna Z63X0.63 mmOwn nylon specification and guidanceNot proof of an X version of Z64
Kizuna Z65 Premium0.65 mmNylon multifilament core and braided outerCompare ordinary depth and gentle touch
BG66 Ultimax0.65 mmHigh-intensity nylon core and braided outerNo measured advantage inferred from 0.01 mm difference

Z63X, Z65 and Ultimax are separately documented products. Small gauge differences do not prove a speed, comfort or lifespan advantage.

START WITH YOUR GAME

What would you like to feel differently?

For the original Z64 packet, begin with the problem you want to understand: response, visible movement or repeated wear. The former Z64X label does not establish a separate model or a special coating.

Track the change, not just the sound

Some settling after stringing is normal. Record when the racket starts to feel different, the hours played and storage conditions. Compare readings using the same method; a phone frequency reading is not the machine setting in pounds. Ask about installation consistency before assuming a different packet will solve it.

Bring this question to ERR →

Separate contact from setup

A stiff-feeling bed, late contact, shuttle speed and technique can all make length difficult. Start with relaxed clears and describe where the shuttle lands. Review your current tension within the racket limit rather than increasing it automatically.

Bring this question to ERR →

The break location matters

A break near the same grommet deserves a frame and grommet check. Breakage after off-centre contact differs from gradual notching in the centre. Bring the racket and a photo of the break; do not assume every early break means the string is defective.

Bring this question to ERR →

Describe what your hand notices

Tell the stringer which shots feel unforgiving and when the sensation began. Compare contact consistency, string choice and tension. Stringing advice is not a treatment for persistent pain; stop playing through pain and seek appropriate assessment.

Bring this question to ERR →

Inspect before installation

Photograph existing chips and discuss cracks, worn grommets and frame shape before work begins. Correct support, the appropriate pattern and staying within the racket limit matter. A chipped finish alone does not establish who caused damage.

Bring this question to ERR →

Explain the change clearly

Grip size, balance, racket weight, stringbed response and timing are different things. A restring does not turn a head-heavy racket into a head-light one. Tell the stringer what changed and compare with your previous setup instead of asking only for more power.

Bring this question to ERR →

What matters on court?

Choose what you want from your next restring.

Choose a stringing priority

Test the same gentle and fast returns

Use your normal grip and compare the landing lengths. A quick-feeling return is useful if you can still take pace off.

Ask your stringerWhich fast and slow shots should I use to compare Z64 with Z63X?

Note where the bed first wears

Track hours and the position of the first wear. If failures keep happening at one hole, bring the frame for a check.

Ask your stringerWould another gauge improve my maintenance or should I inspect the frame?

Compare a normal clear with a late lift

Test both with familiar shuttles and tell your stringer which is harder to repeat. Use the applicable frame limit to guide a starting setting.

Ask your stringerHow can I keep my familiar length while trying Z64?

Check one nearby Kizuna model

Compare two known strings using the same frame model and setting where practical. Do the short return after the faster shot.

Ask your stringerIs Z65 the right nearby comparison if soft control matters most?

UNDERSTAND THE WHOLE SETUP

Different equipment. Different questions.

Different rackets

The same requested pounds can feel different across frame shapes and stringbed dimensions. Record the racket, not just the number.

Try Z64 on the same racket first. Record the full racket model and the agreed tension before trying another frame.

Different strings

Gauge, construction and surface feel change the comparison. Do not treat every thin string as the same product.

Compare Z64 with Kizuna Z63X using the same racket and familiar shots. Use the table above to check gauge and construction before changing the setup.

Different installation

Machine calibration, support, clamps, pattern and technique can affect consistency. Ask about the process as well as qualifications.

If Z64 repeatedly breaks near the same hole, show your stringer a close-up of that spot and ask them to inspect the grommet.

Different sessions

Shuttle speed, hall conditions, fatigue and timing influence feedback. Compare familiar drills before drawing a conclusion.

Use the same shuttle speed and repeat a few clears, drives and net shots. Record playing hours alongside any change in how Z64 feels.

BEFORE · DURING · AFTER

Prepare, play and review with purpose.

01Prepare

Bring your racket history

Note your racket model, previous string, requested tension and the change you want. A photo of recurring breakage helps.

02Inspect & agree

Make the plan specific

Review the frame and grommets. Confirm string, colour availability, tension within the racket limit and price before work starts.

03Restring

Keep a useful record

Keep the string model, requested tension and date together. Ask about the pattern and checks relevant to your racket.

04Test on court

Repeat familiar shots

Try clears, drives, blocks and net shots under comparable conditions. Record comfort, length and placement, not only sound.

05Review & adjust

Change one thing at a time

Bring your observations back. Keep the setup if it works; otherwise agree on one practical change for the next restring.

Z64 questions, clearly answered.

Why does this page say Z64 while the URL says z64x?

The owned yellow packet, archived manufacturer advertisement and official 2019 registry identify Z64. The existing URL is retained so established links continue working.

What specifications are documented for Z64?

The archived manufacturer advertisement lists 0.64 mm, 10 m, a nylon multifilament core and braided nylon outer.

Does the existing packet identify Japan?

Yes. The owned packet shows Japan, while current version and availability should still be confirmed.

Was a separate official Z64X product verified?

No. This guide does not invent a separate model from the former ERR label.

Does sticky surface feel prove a firmer stringbed?

No. That causal claim was not verified; surface impression and string movement are not stiffness measurements.

Is Z64 proven more durable than Ultimax?

No controlled comparison establishing that advantage was verified here.

Can I copy the old 26 lbs setting?

Do not copy it automatically. Check applicable product instructions, exact frame limits and condition, plus your setup history.

Can Z63X guidance fill the Z64 tension-information gap?

No. Product-specific guidance should not be transferred merely because names or gauges are similar.

What do the DT intervals represent?

An old ERR record under the former Z64X label, with incomplete batch and measurement conditions; not a newly verified controlled test.

What matters if strings move or break near the frame?

Discuss contact pattern, wear location, grommets, frame condition and installation context rather than assuming a coating or model change fixes the cause.

What is the current listed service price?

The checked ERR catalogue entry lists RM43 including string and labour. Confirm exact product, price and availability.

What should a Z64 enquiry include?

Racket model, current string, previous pounds, frequency, preferred response and any older booking described as Z64X.

From court to court

How did Kizuna Z64 play for you?

Your experience can help another player choose their next string.

Player reviews

Share your experience

Your rating
Choose 1–5 stars

What players say

Your first-hand experience matters.

Be the first to review Kizuna Z64. Share what you liked and what could be better.

Setapak · Kuala Lumpur

Ready to discuss your string setup?

Bring your Z64 questions, racket model and previous setup. Discuss the contact feel you want before choosing the next restring.

Book stringing Explore the string list
YOUR VISIT · TAMAN MELATI, KUALA LUMPUR

Book stringing.
Bring your racket and questions.

Discuss your Z64 setup with ERR before visiting. Tell us your racket model, previous tension and the shot or feel you want to review.

Book through ERR MemberAsk ERR on WhatsApp ↗
Prepare a question for your visitOpen WhatsApp with my question ↗You can review your message in WhatsApp before sending.

The existing ERR catalogue entry lists RM43 including string and labour. Confirm current price and availability of the actual Z64 packet before travelling. A historical listing does not guarantee current stock.

The enquiry now identifies Kizuna Z64 while this established URL retains its old z64x wording. Provide your racket model, present string, previous pounds, frequency and preferred response. Mention the former listing name if referring to an earlier appointment.

ERR is based in Taman Melati Utama, Setapak, Kuala Lumpur. Players travelling from Gombak use this same appointment location. Bring the racket and previous setup details so any change can be discussed with the correct product identity.

+60 16-527 1599

By appointment · Check available slots before travelling.

ERR BADMINTON RESTRING

Find us in Taman Melati Utama

G-3, PV6 Platinum Hill Condo, No. 3 Jalan Melati 3, Taman Melati Utama, 53100 Kuala Lumpur, Malaysia.

Get directions in Google Maps ↗