Yonex BG65 Titanium: String Guide & Stringing in Setapak KL
Yonex BG65 Titanium, code BG65TI, is a 0.70 mm nylon badminton string with a compound titanium hydride coating. Compare its impact-feel positioning with standard BG65 and thinner alternatives before choosing your next Setapak restring.

Titanium refers to the coating
BG65 Titanium is a nylon multifilament badminton string, not a solid metal wire. Yonex lists a high-polymer nylon core, special braided high-polymer nylon outer and compound titanium hydride coating. The nominal gauge is0.70 mm, the product code is BG65TI, and the official specification lists Japan as the origin.
The coating is the key distinction to keep in mind when comparing it with standard BG65. Both share a nominal diameter, but the names do not describe identical constructions. Ask for the complete model name when booking or checking a packet so your setup record remains useful.
Yonex describes sharp yet comfortable impact and positions the string towards hard hitters. Those are manufacturer descriptions, not a guarantee that every racket will feel comfortable at every tension. The finished result still needs to be assessed with your racket and contact pattern.
The single set is 10 metres. Compare the full BG65TI code on your packet with previous stringing notes before trying to repeat a setup. The 0.70 mm diameter is shared with standard BG65, so gauge and colour alone are a poor way to identify which string is on the racket.

Check crisp contact against gentle touch
Use a range of shots when trying BG65 Titanium. Controlled drives can help you describe a distinct contact sensation, while blocks and net returns reveal how easily you can reduce the pace. Include clears to judge whether you can get familiar length without adding unnecessary effort.
A sharp sound may be enjoyable, but it should not stand in for a performance measurement. Different shuttles, rooms and rackets change the impression. Record whether your placements are repeatable and whether soft shots remain manageable, rather than deciding that a louder note means the string is faster.
If the impact feels too abrupt, explain when it happens. A late defensive contact and a clean attacking stroke can feel different even in the same stringbed. The useful next discussion concerns your setup and technique context, not a blanket statement that coated strings suit everyone.
Split a rally drill into two parts. Let a partner feed a drive and return it with a short, decisive swing. Then use a similar feed to play a shorter reply near the net. Notice which shot gives you a clearer sense of where the shuttle contacted the bed and which still needs a change of hand pressure.

A shared gauge is not shared behaviour
BG65 and BG65TI are both0.70 mm, which makes them a useful pair for exploring the limits of gauge-based selection. The coating specification differs. There is no reason to assume they must have identical touch, sound, wear or retention simply because the printed diameter is the same.
The official coating description does not establish a measured friction coefficient or a universal control advantage. It also does not justify drawing an invented material cross-section. The artwork on this page supports discussion and inspection; precise construction facts are kept in the written specification.
When comparing with BG80 or BG66 Ultimax, note that construction and diameter change together. A different sensation cannot confidently be attributed to one feature unless the comparison controls the other variables. Treat your preference as useful feedback rather than a laboratory conclusion.
A useful pair of notes after a same-frame BG65 comparison is how the initial impact feels and where a half-paced block lands. Put those observations next to the date of each restring. A coating difference is one reason to compare the two, while string age and racket shape also influence what you feel.

Keep the setup within your racket's limits
Provide the racket model, weight version, previous string and requested tension before deciding on BG65 Titanium. Check frame and grommet condition. The string's0.70 mm gauge and coating do not override the racket manufacturer's permitted range or applicable stringing pattern.
Do not select a high setting simply because the brand mentions hard hitters. That phrase does not prescribe a tension. The28 lbs figure in the archived DT section belongs to an old record and should not be copied as a default for your racket.
Pre-stretch, main/cross differences and knots are installation choices to discuss against the actual frame instructions and equipment. Keep the first comparison understandable by limiting simultaneous changes to grip, racket, string and tension. Record the agreed setup for the next visit.
Mention the tension you last asked for along with the specific type of racket you are bringing. If you prefer the current depth and only want clearer feedback, ask which parts of the existing setup can be preserved. Keep the string choice and adjustment separate on the receipt for your next visit.

Coating is not damage protection
A coated string still needs normal wear and equipment checks. Repeated breakage near one hole may indicate a grommet or frame-edge problem. Changing to BG65 Titanium does not repair that cause. Ask for inspection before assuming that another brand or a thicker gauge will solve repeated edge breaks.
At the centre of the bed, observe fraying or notching and note playing hours. Do not use one player's replacement interval as a promise for your own racket. Mishits, setup, frequency and storage differ, and a brand durability profile is not a number of weeks.
A stringbed may no longer give the response you want before a visible break. If clears, touch or consistency change, describe the change along with the amount of play. That observation helps a follow-up discussion even when no calibrated DT measurement is available.
After a series of sessions, look at a few of the central intersections and note where the strings have worn. If the same upper frame hole keeps failing, explain the pattern before deciding whether to switch back to a plain-braid option. A break photo helps a stringer examine the particular grommet.

Compare by your main concern
Consider BG65 Titanium when you want to explore a coated0.70 mm option and the manufacturer's sharp-impact positioning appeals to you. It still needs to pass your own soft-shot and clear-length checks. Player level or singles-versus-doubles category alone does not establish suitability.
Compare standard BG65 when abrasion durability and maintenance are central concerns. Include BG80 when you want to assess another firm-feedback construction at0.68 mm. Include BG66 Ultimax when a thinner0.65 mm quick-response design is the priority, with the maintenance trade-off kept in view.
This page does not establish that BG65TI lasts longer, holds tension better or produces faster shots than those alternatives under matched conditions. The practical aim is to find the response you can use consistently, with a replacement routine you accept.
Start with standard BG65 when the question is whether you prefer a plain or coated 0.70 mm model. Use a thinner choice only if gauge is part of the trial you want to run. Decide which gentle and fast strokes are most important before comparing the setups, especially if you mostly play defensive doubles.
BG65 Titanium Knowledge Check
How well do you know this string?
0 / 8 answeredYour result
Review each answer, then try again when you are ready.
| Nominal gauge | 0.70 mm |
|---|---|
| Product code | BG65TI |
| Retail set length | 10 m |
| ERR restring | RM41.00, string and labour |
See the response profile
Five-characteristic spider chart
Contact, deflection and rebound
Press play to follow contact → deflection → rebound.
Slow-motion teaching diagram, not a measured speed or tension test.
The numbers behind the feel
Yonex's 2026 catalogue rates BG65 Titanium across five characteristics. These are brand-relative values, not ERR measurements, percentages or a cross-brand ranking. The chart uses an 11-point display because the catalogue includes scores above 10.
BG65 Titanium DT over three days
-
Day 154–56 DT
-
Day 252–55 DT
-
Day 349–51 DT
Recorded range Range midpoint
These readings describe an earlier installation. Use them to understand the recorded change across days.
BG65 Titanium and three alternatives
Compare construction and priorities rather than treating a model name as an upgrade ladder. These are different options, not a controlled ranking.
| String | Gauge | Construction or feel | What to check on court |
|---|---|---|---|
| BG65 Titanium | 0.70 mm | Compound titanium hydride coating | Does the impact feel suit both hard and soft shots? |
| BG65 | 0.70 mm | Nylon core and braid; separate specification | Compare feel despite the shared gauge |
| BG80 | 0.68 mm | Vectran in core and oval nylon braid | Assess texture and contact preference |
| BG66 Ultimax | 0.65 mm | High-intensity nylon and braided outer | Consider response and maintenance together |
BG65 Titanium is a coated 0.70 mm nylon model, not standard BG65 under another name. Compare construction and priorities rather than treating the alternatives as an upgrade ladder.
What would you like to feel differently?
For BG65 Titanium, begin with the impact feel you want to assess, the wear you notice and the racket condition. A coating does not remove the need to inspect equipment and compare soft shots.
Track the change, not just the sound
Some settling after stringing is normal. Record when the racket starts to feel different, the hours played and storage conditions. Compare readings using the same method; a phone frequency reading is not the machine setting in pounds. Ask about installation consistency before assuming a different packet will solve it.
Bring this question to ERR →Separate contact from setup
A stiff-feeling bed, late contact, shuttle speed and technique can all make length difficult. Start with relaxed clears and describe where the shuttle lands. Review your current tension within the racket limit rather than increasing it automatically.
Bring this question to ERR →The break location matters
A break near the same grommet deserves a frame and grommet check. Breakage after off-centre contact differs from gradual notching in the centre. Bring the racket and a photo of the break; do not assume every early break means the string is defective.
Bring this question to ERR →Describe what your hand notices
Tell the stringer which shots feel unforgiving and when the sensation began. Compare contact consistency, string choice and tension. Stringing advice is not a treatment for persistent pain; stop playing through pain and seek appropriate assessment.
Bring this question to ERR →Inspect before installation
Photograph existing chips and discuss cracks, worn grommets and frame shape before work begins. Correct support, the appropriate pattern and staying within the racket limit matter. A chipped finish alone does not establish who caused damage.
Bring this question to ERR →Explain the change clearly
Grip size, balance, racket weight, stringbed response and timing are different things. A restring does not turn a head-heavy racket into a head-light one. Tell the stringer what changed and compare with your previous setup instead of asking only for more power.
Bring this question to ERR →What matters on court?
Choose what you want from your next restring.
Feel the coating difference during a drive
Compare a firm drive with a controlled short block. Standard BG65 is the same-gauge reference when you want to explore a change in feedback.
Ask your stringerCan I compare BG65 Titanium with BG65 on the same racket and setting?
Track wear separately from impact feel
Record hours and inspect the centre intersections and frame edge. Bring any wear photo when asking whether a 0.70 mm coated option fits your maintenance routine.
Ask your stringerIs the break linked to wear, contact position or a grommet?
Try a relaxed clear before adjusting the setup
Check how far a comfortable clear travels with BG65 Titanium. Describe whether the stringbed feels abrupt on a late block when you discuss your next setting.
Ask your stringerHow can I keep easy depth while assessing a different contact feel?
Take pace off a familiar exchange
Alternate a fast reply and a push to the middle of the court. See whether you can reproduce the depth change without gripping harder.
Ask your stringerWould regular BG65 or Titanium match my preferred soft-shot feedback?
Different equipment. Different questions.
Different rackets
The same requested pounds can feel different across frame shapes and stringbed dimensions. Record the racket, not just the number.
Try BG65 Titanium on the same racket first. Record the full racket model and the agreed tension before trying another frame.
Different strings
Gauge, construction and surface feel change the comparison. Do not treat every thin string as the same product.
Compare BG65 Titanium with BG65 using the same racket and familiar shots. Use the table above to check gauge and construction before changing the setup.
Different installation
Machine calibration, support, clamps, pattern and technique can affect consistency. Ask about the process as well as qualifications.
If BG65 Titanium repeatedly breaks near the same hole, show your stringer a close-up of that spot and ask them to inspect the grommet.
Different sessions
Shuttle speed, hall conditions, fatigue and timing influence feedback. Compare familiar drills before drawing a conclusion.
Use the same shuttle speed and repeat a few clears, drives and net shots. Record playing hours alongside any change in how BG65 Titanium feels.
Prepare, play and review with purpose.
Bring your racket history
Note your racket model, previous string, requested tension and the change you want. A photo of recurring breakage helps.
Make the plan specific
Review the frame and grommets. Confirm string, colour availability, tension within the racket limit and price before work starts.
Keep a useful record
Keep the string model, requested tension and date together. Ask about the pattern and checks relevant to your racket.
Repeat familiar shots
Try clears, drives, blocks and net shots under comparable conditions. Record comfort, length and placement, not only sound.
Change one thing at a time
Bring your observations back. Keep the setup if it works; otherwise agree on one practical change for the next restring.
BG65 Titanium questions, clearly answered.
Is BG65 Titanium made from solid titanium?
No. It has a nylon multifilament core and braided nylon outer, with a compound titanium hydride coating. The product code is BG65TI.
Is it the same as standard BG65?
No. Both are 0.70 mm, but BG65 Titanium has a separate coating specification and product code. Keep the model names distinct in your setup record.
Does the coating guarantee more power?
No guaranteed shuttle-speed gain is established. Yonex's impact-feel positioning is a manufacturer description, not a measured result for every player.
What shots should I include in a trial?
Use drives, soft blocks, net returns and clears. Judge whether the contact sensation works across different effort levels rather than only on one hard hit.
Is 28 lbs the correct setting for BG65TI?
There is no universal setting. 28 lbs appears in the archived ERR record, but your racket limits, frame condition and previous setup guide the choice.
Can the coating protect a damaged grommet?
No. Repeated breaks at a frame hole require inspection. A coated string does not repair a sharp or damaged contact point.
How many sessions will BG65 Titanium last?
No fixed interval can be promised. Track actual playing hours, visible wear and when the response stops suiting your needs.
Can I compare the archived DT chart with another string as a ranking?
Not reliably. The old test conditions are incomplete. The chart preserves the record without establishing a controlled cross-model retention ranking.
Why compare BG80 with BG65 Titanium?
BG80 is a different 0.68 mm construction with Vectran in its core and an oval nylon braid. It is useful when exploring firm-feedback preferences, not as an automatic upgrade.
Are Yonex ratings independent ERR test scores?
No. They are manufacturer-relative catalogue profiles. They do not describe a guaranteed outcome in your racket.
How should I name the string in my booking enquiry?
Use BG65 Titanium or BG65TI, then provide the racket model, current setup, playing frequency and desired feel. This avoids confusion with standard BG65.
Where can I discuss BG65TI stringing in KL?
Use ERR's existing member appointment flow or the BG65TI WhatsApp enquiry. Check the map for Taman Melati Utama, Setapak, before travelling.
How did Yonex BG65 Titanium play for you?
Your experience can help another player choose their next string.
What players say
Your first-hand experience matters.
Be the first to review Yonex BG65 Titanium. Share what you liked and what could be better.
Ready to discuss your string setup?
Bring your BG65 Titanium questions, racket model and previous setup. Discuss the contact feel you want before choosing the next restring.
Book stringing Explore the string listBook stringing.
Bring your racket and questions.
Discuss your BG65 Titanium setup with ERR before visiting. Tell us your racket model, previous tension and the shot or feel you want to review.
Book through ERR MemberAsk ERR on WhatsApp ↗Prepare a question for your visit
Open WhatsApp with my question ↗You can review your message in WhatsApp before sending.When contacting ERR, write BG65 Titanium or BG65TI rather than only BG65. Include the racket model, current string, previous requested tension, playing frequency and the feel you want to change. If a repeated break is the concern, include its location or a photograph.
Appointments use the existing ERR Member flow, with WhatsApp available for model-specific questions. Confirm the current listed price, colour and availability before travelling to the Taman Melati Utama location in Setapak, Kuala Lumpur. The map identifies the actual appointment location.
After the restring, compare familiar strokes over normal sessions. Keep the feedback concrete: manageable blocks, comfortable length, an impact you like, or a response you do not prefer. That is a more useful basis for the next change than choosing a coating name or a higher number by itself.
By appointment · Check available slots before travelling.
Find us in Taman Melati Utama
G-3, PV6 Platinum Hill Condo, No. 3 Jalan Melati 3, Taman Melati Utama, 53100 Kuala Lumpur, Malaysia.
Get directions in Google Maps ↗


